Understanding Elevation Certificates and Their Purpose

What an Elevation Certificate Is and Why It Matters

An elevation certificate is an official document that records the height of a building in relation to the flood elevation for the area where it sits. Created by a licensed surveyor, this certificate shows the precise elevation of the lowest floor of a structure, the ground level, and other key measurements. The document serves as proof of these measurements and is used by insurance companies, lenders, and government agencies to determine flood risk and insurance requirements.

Free Guide to Car Mart Payment Plans Explained →

The Federal Emergency Management Agency (FEMA) established elevation certificates as a way to standardize how flood risk is measured across the United States. According to FEMA data, approximately 20 percent of flood insurance claims come from properties outside high-risk flood zones, which demonstrates why accurate elevation information matters. When a property sits near a flood-prone area, even a difference of one or two feet can determine whether a building must carry flood insurance and how much that insurance will cost.

These certificates become especially important when properties are bought and sold. Lenders often require them before issuing mortgages on properties in or near flood zones. Real estate transactions in flood-prone counties have increased the demand for elevation certificates significantly over the past decade. In some states, like Louisiana and Florida, elevation certificates have become routine documents in most property sales.

The elevation certificate also includes information about how the building is constructed—whether it has a basement, crawlspace, or is built on stilts. This structural information directly affects how insurance companies rate the risk. A building elevated above the base flood elevation typically has lower insurance costs than one where the lowest floor is at or below that level.

Practical Takeaway: An elevation certificate is a surveyor's measurement document that shows where a building sits relative to flood levels in its area. This information shapes insurance costs and lending decisions.

How Elevation Certificates Are Created and What They Contain

Creating an elevation certificate requires hiring a licensed surveyor who has specific training in flood elevation measurements. The surveyor visits the property and takes precise measurements using specialized equipment. They measure the elevation of the finished floor of the lowest occupiable level, the elevation of the lowest adjacent grade (the ground level next to the building), and the elevation of the highest and lowest points of the roof. These measurements must be accurate to within one-tenth of a foot.

Free Guide to Dental Implant Programs in New Mexico →

The surveyor also documents the building's relationship to the base flood elevation (BFE)—the water level that has a 1 percent chance of being equaled or exceeded in any given year. This is the elevation that determines whether an area is classified as high-risk for flooding. The difference between the building's elevation and the BFE is called the "freeboard," and it shows how much protection the building has from flood waters.

A complete elevation certificate includes several key pieces of information: the property address and legal description, the surveyor's name and license number, the date of the survey, specific elevation measurements for different parts of the structure, the flood zone designation from FEMA maps, and the base flood elevation for that area. The certificate also notes whether the building has a basement, crawlspace, or other space below the main floor level. Many versions include a diagram showing the building's profile and how it relates to flood levels.

The cost of an elevation certificate typically ranges from $400 to $800, though prices vary by region and building complexity. Some property owners may receive a discounted rate if the surveyor is already working in their neighborhood. The timeline for obtaining one is usually two to four weeks from the time you contact a surveyor until you receive the final document.

The document must be prepared using FEMA's official form, which has been standardized across the country. This form is currently in its third version, and older certificates may need to be updated if they don't match the current format. The surveyor certifies the measurements by signing and stamping the document with their professional seal, which makes it a legal record.

Practical Takeaway: A licensed surveyor creates the elevation certificate by measuring the building and comparing it to local flood levels. The finished document includes specific elevation numbers and is valid for multiple years as long as the building structure hasn't changed.

Understanding Flood Zones and How Elevation Certificates Connect to Them

FEMA divides properties into different flood zones based on their risk of flooding. The highest-risk areas are Special Flood Hazard Areas (SFHAs), which include the 100-year floodplain. The 100-year floodplain is defined as an area that has a 1 percent chance of flooding in any given year. Though people often think of "100-year floods" as events that happen once per century, this is misleading—the 1 percent annual risk means that a flood of this magnitude could occur multiple times within a 100-year period.

Free Guide to Changing Backgrounds in Microsoft Teams →

Properties within the 100-year floodplain are typically required to carry flood insurance if they have federally backed mortgages. According to the National Flood Insurance Program (NFIP), about 5.2 million policies are in force across the United States, with an average annual premium of approximately $1,100. However, this average varies dramatically based on elevation and risk—some policies cost as little as $300 per year, while others exceed $3,000.

The elevation certificate helps insurance companies place a property within the correct flood zone and determine its exact risk profile. A building that sits just above the base flood elevation will have much lower insurance costs than one sitting below it. In some cases, an elevation certificate showing that a home is elevated above the BFE may allow a property owner to move to a lower insurance rate category, potentially saving thousands of dollars over time.

FEMA flood maps are regularly updated as new data becomes available. When a property is remapped into a different flood zone, or when flood maps change in a community, property owners may need updated elevation certificates to reflect the new conditions. Changes in flood maps have affected millions of properties since 2010, with some properties moving into higher-risk zones and others moving to lower-risk zones.

Elevation certificates also provide documentation if a property owner disagrees with its flood zone designation. Through a process called a Letter of Map Amendment (LOMA) or Letter of Map Revision (LOMR), property owners can challenge their flood zone status if they have survey data showing their property should be in a different zone. An elevation certificate provides the technical evidence needed for this challenge.

Practical Takeaway: Elevation certificates connect directly to flood zones by providing the precise measurements that determine whether a property is in a high-risk flooding area. This connection affects insurance requirements and costs.

When You Need an Elevation Certificate and Common Scenarios

Property owners encounter elevation certificates during several different situations. The most common is during a real estate transaction. When buying a home in or near a flood zone, lenders almost always request an elevation certificate before issuing a mortgage. Sellers may obtain one in advance to streamline the sale process. In states like Florida, Louisiana, and Texas, where flooding is more common, elevation certificates have become routine documents in nearly all property sales, even in areas with moderate flood risk.

Your Free Guide to Fall Garlic Planting Basics →

Homeowners who want to reduce their flood insurance premiums may seek an elevation certificate to document that their home has been elevated or retrofitted to sit higher above the base flood elevation. If a property owner has spent money improving the structure to reduce flood risk—such as raising the foundation or elevating utilities—the elevation certificate provides proof that these improvements have been made. Insurance companies may lower rates by 10 to 60 percent depending on how much the elevation improves.

If a property is newly constructed or undergoes substantial renovation, an elevation certificate is often required by local building departments. Building codes in flood-prone areas mandate that new structures meet minimum elevation standards. The certificate verifies that construction met these codes. Some municipalities require elevation certificates every time a property changes hands or when certain improvements are made.

Commercial property owners and apartment complex managers may need elevation certificates for insurance and lending purposes. Flood insurance for commercial properties is typically more expensive and more complicated than residential insurance, and lenders require detailed elevation documentation. Industrial properties near rivers or coastal areas almost always need current elevation certificates.

Another scenario involves insurance claims. If a property has flooded, the insurance company may request an elevation certificate as part of the claims investigation process. The certificate helps determine whether the flood resulted from a covered event or from other causes. Property owners may also need elevation certificates when filing appeals related to insurance rates or coverage determinations.

Municipalities sometimes request elevation certificates when updating local floodplain maps or when evaluating properties for community development projects. Non-profit organizations working on