How to Measure Chainsaw Chain Step by Step

Understanding Chainsaw Chain Pitch and Its Importance

Chainsaw chain pitch is one of the most critical measurements you'll need to understand when working with chainsaws. Pitch refers to the distance between the drive links on the chain, measured in inches. Most modern chainsaws use one of three standard pitches: .325 inches, .375 inches (also called 3/8 inch), or .404 inches. Some older or specialty models may use different measurements, but these three account for the vast majority of chainsaws in residential and commercial use.

Understanding Credit Card Numbers and Meanings →

Getting the pitch right matters significantly because using an incorrect pitch chain can damage your chainsaw's sprocket, bar, and engine components. A chain with the wrong pitch won't fit properly on the bar, creating safety hazards and mechanical problems. The pitch determines how the chain moves around the guide bar and interacts with the engine's drive sprocket. When these parts don't match, the chain can slip, bind, or fall off during operation, creating dangerous situations.

The pitch is typically stamped or printed on the side of your chainsaw's guide bar, on the chain itself, or in your owner's manual. Many chainsaw owners never check this measurement and simply assume their replacement chain will work because it looks similar to the original. This assumption causes problems that could have been prevented with a quick measurement and verification.

Pitch differs from gauge, which measures the thickness of the drive links. You need to verify both measurements to get the correct replacement chain. Some people confuse these two specifications, leading to ordering the wrong parts. Understanding the relationship between pitch and other chain measurements will help you make informed decisions about maintenance and replacement.

Practical Takeaway: Before replacing any chain, locate the pitch specification on your guide bar or in your owner's manual and write it down. This simple step prevents ordering incorrect parts and ensures your chainsaw operates safely and efficiently.

Locating and Reading Your Chainsaw's Specifications

Your chainsaw manufacturer provides chain specifications in several locations, and knowing where to look makes the measurement process straightforward. The most common location is on the guide bar itself. Most manufacturers stamp the pitch directly onto the bar's side surface, often near the connection point where the bar attaches to the chainsaw body. This marking might appear as ".325" or "3/8" or similar notation. The marking may be small and worn, especially on older equipment, but it's usually there if you look carefully.

Free Guide to Understanding Tire Change Costs →

The owner's manual is another essential resource that contains not only the pitch but also the gauge (thickness) and the recommended chain length. If you don't have the physical manual, many manufacturers make PDF versions available on their websites. You can typically find these by searching for your specific chainsaw model number along with "manual" or "specifications." The model number is usually printed on the chainsaw's housing or on a label near the engine.

Some chainsaws have the specifications printed on a metal tag or sticker attached to the equipment. These tags might be located on the fuel tank, near the handle, or on the engine housing. Over time, these labels can fade or wear away, which is why having the manual as a backup is valuable. Take photos of any specification tags or markings you find, as this creates a permanent reference you can access later.

If you've inherited a chainsaw or purchased a used one without documentation, examining the existing chain carefully provides clues. The chain itself sometimes has markings indicating its pitch. Additionally, you can measure the existing chain to determine the pitch, which this guide covers in detail in later sections. Measuring an existing chain is more involved than simply reading a specification, but it's a reliable method when documentation isn't available.

Practical Takeaway: Create a reference document for your chainsaw that includes the model number, engine displacement, and chain specifications. Store this information in your phone, a file, or printed copy so you have it whenever you need to purchase replacement parts or perform maintenance.

The Direct Measurement Method for Determining Pitch

If your chainsaw's specifications aren't clearly marked, you can measure the pitch directly using basic tools. This method requires a ruler, measuring tape, or calipers and takes only a few minutes. Start by removing the chain from the saw—this makes measurement easier and safer. Lay the chain on a flat surface and ensure it's straight but not stretched. Chains can appear to stretch during use, so take measurements when the chain is at rest in its normal state.

Get Your Free American Express Customer Service Guide →

To measure pitch accurately, you'll count the drive links. Drive links are the metal pieces that fit into the sprocket; they're different from the connecting links. Start at one drive link and count forward to the third drive link. The distance you measure from the center of the first drive link to the center of the third drive link, divided by two, gives you the pitch. For example, if the distance from the center of your first drive link to the center of your third drive link measures .75 inches, then dividing by two gives you .375 inches (or 3/8 inch) pitch.

This method works because drive links are spaced at consistent intervals around the chain. By measuring across multiple links, you account for any slight variations in individual links and get a more accurate average measurement. Using at least three links in your measurement increases accuracy compared to measuring just two links. If you measure across more links, make sure you're still counting accurately and divide your total distance by the number of intervals, not the number of links.

Some people prefer using digital calipers for this measurement because they provide precise readings to the decimal point. Analog rulers work fine, but you need to read them carefully. Once you determine your pitch measurement, compare it to the three standard pitches: .325 inches, .375 inches, or .404 inches. Your measurement should fall very close to one of these standards. Small variations in measurement technique can occur, so if your measurement is close to a standard pitch, that's likely the correct one for your chainsaw.

Practical Takeaway: Write down your pitch measurement and note the date you measured it. Keep this information with your owner's manual or in your tool storage area so you have it ready when ordering replacement chains.

Measuring Chain Gauge and Length

Beyond pitch, two other measurements determine whether a replacement chain will work with your chainsaw: gauge and length. Gauge refers to the thickness of the drive links where they fit into the sprocket. Common gauges are .050 inches, .058 inches, .063 inches, and .325 inches. Getting the gauge right is critical because a chain with incorrect gauge will either be too loose or too tight on the bar, creating unsafe conditions or failing to move properly around the sprocket.

Get Your Free WIC Information Guide for Indiana →

To measure gauge, you'll need calipers, as standard rulers don't provide the precision required. Locate a drive link on your chain and measure its thickness at the thinnest point. This measurement tells you your chain's gauge. Many chainsaws use either .050 or .058 gauge chains, but checking your specific equipment prevents mistakes. Just like pitch, the gauge is often printed on the guide bar or in the owner's manual, but physical measurement confirms the specification.

Chain length is measured by counting the number of drive links. This number typically ranges from 40 to 90 drive links, depending on the guide bar length. A 14-inch guide bar usually accommodates around 40 to 50 drive links, while an 18-inch bar might use 55 to 65 drive links. The length must match both your guide bar and your chainsaw's engine specifications. Using a chain that's too long can stress the engine and sprocket, while a chain that's too short won't stay on the bar properly.

When replacing your chain, the easiest approach is to count the drive links on your existing chain. Simply lay the chain flat and count each individual drive link from one end to the other. Write this number down along with your pitch and gauge measurements. When you purchase a replacement chain, provide all three measurements to ensure you get the exact correct part. Many hardware stores and online retailers can cross-reference these measurements to find the specific chain model your saw requires.

Practical Takeaway: Before visiting a store or ordering online, gather three pieces of information: pitch, gauge, and the number of drive links. Providing all three measurements to a store associate or online retailer virtually eliminates the possibility of ordering an incompatible chain.

Using Your Chainsaw's Manual and Manufacturer Resources

Your chainsaw's owner's manual is the most reliable source for accurate chain specifications and should be your first stop when determining what replacement chain you need

Get Your Free Glucometer Usage Guide →