Get Your Free Clogged Toilet Repair Guide

Understanding Common Causes of Clogged Toilets

A clogged toilet is one of the most common plumbing problems homeowners face. According to the American Society of Home Inspectors, toilet clogs represent approximately 25% of all residential plumbing calls. Understanding what causes clogs is the first step toward preventing them and knowing when you can handle the problem yourself.

Learn About Semi Truck Motorhomes for Travel →

The most frequent cause of toilet clogs is excessive toilet paper buildup. Many people don't realize that toilet paper breaks down differently depending on the type and how much is used. Standard single-ply toilet paper dissolves more readily in water than double-ply or premium brands. When large amounts accumulate—particularly when people flush multiple times without allowing water to clear between flushes—a blockage forms in the trap or drain line.

Another major cause involves non-flushable items entering the toilet system. Despite packaging that says "flushable," many products should never go down a toilet. These include:

• Paper towels and facial tissues (they don't break down like toilet paper)
• Wet wipes and baby wipes, even those labeled flushable
• Feminine hygiene products
• Cotton balls and cotton swabs
• Dental floss
• Hair
• Medication and supplements
• Food waste and grease
• Cat litter, even flushable varieties
• Diapers and plastic items

Foreign objects also cause significant problems. Children sometimes flush toys, coins, or other small objects. Pet owners occasionally deal with litter or pet waste entering the system. Older homes with cast iron pipes face additional challenges because mineral buildup and corrosion create rough interior surfaces where debris catches more easily.

Understanding these causes helps you prevent future clogs. The practical takeaway is simple: use only toilet paper and human waste in toilets, and use reasonable amounts of paper per flush. Post reminders near bathrooms in your home to remind family members and guests about what can and cannot be flushed.

Tools and Materials You May Need for DIY Repair

Before calling a plumber, you can attempt to clear many clogs using basic tools and materials already in most homes. This guide covers what supplies might help you address mild to moderate blockages. Having these items on hand means you're prepared when a clog occurs.

Learn About Home Flea Removal Methods →

The plunger is the first tool to try for most clogs. Not all plungers work the same way. A cup plunger—the standard rubber plunger with a flat bottom—works well for sinks but is less effective for toilets. A flange plunger, which has an additional rubber extension that fits inside the toilet bowl, creates a better seal and generates more suction and pressure. The extra rubber piece creates a one-way valve effect that dislodges clogs more effectively. When using a plunger, fill the bowl with enough water to cover the plunger cup completely, and use quick, forceful strokes for about 15-20 seconds before checking results.

A toilet auger (also called a plumbing snake) works differently than a plunger. This flexible coiled tool extends into the drain to break apart or hook out blockages. Toilet augers range from simple manual versions costing $15-$30 to powered versions costing $100 or more. The manual auger works by turning a crank handle while pushing the tip down the drain. As it rotates, it either breaks up the clog or hooks onto the obstruction so you can pull it out. Toilet augers have a rubber coating at the tip to prevent scratching porcelain.

Other materials that may help include:

• Rubber gloves (thick household gloves protect your hands)
• Bucket (for moving water if needed)
• Wire coat hanger (can be straightened to fish out visible obstructions)
• Wet/dry vacuum (for removing standing water)
• Newspaper or towels (for cleanup and protecting your bathroom floor)
• Hot water (not boiling, which can crack porcelain)

The practical takeaway: Invest in a flange plunger and keep it stored near your toilet. A basic plunger solves approximately 70% of residential toilet clogs, so this single tool may be all you need. If you have multiple bathrooms, having a dedicated toilet plunger in each bathroom prevents cross-contamination and means you're always prepared.

Step-by-Step Process for Using a Plunger Correctly

Using a plunger correctly makes a significant difference in whether you'll successfully clear the clog. Many people use incorrect techniques that reduce effectiveness. This section explains the proper method used by plumbers and professionals who address these issues regularly.

How To Make A Whiskey Sour At Home →

First, prepare your workspace. Ensure you have adequate lighting—use a flashlight or turn on the bathroom light so you can see into the bowl clearly. Put on rubber gloves to maintain hygiene. Spread newspaper or old towels around the toilet base to catch any splashes. Close the bathroom door to prevent water from spreading if the plunger causes water to splash.

Second, check the water level in the bowl. The water should cover the plunger cup completely—usually about 4-6 inches of water. If the water level is too low, the plunger won't create a proper seal. If standing water is at a normal level, you're ready to proceed. If the bowl is completely backed up with no water, you'll need to manually add water from a bucket first.

Third, position yourself properly. Stand facing the toilet with your feet shoulder-width apart for balance. This posture allows you to apply force without losing your footing. Place the plunger over the drain hole, ensuring the flange (the rubber extension) points downward into the drain. The cup should completely cover the hole with a tight seal all the way around.

Fourth, perform the plunging action with proper technique. Push down quickly and forcefully, compressing the air in the plunger cup. This creates pressure that pushes against the clog. Then pull up quickly and forcefully, creating suction that pulls the clog back up. This push-pull motion is continuous and vigorous. Perform 15-20 rapid cycles without lifting the plunger off the bowl (this maintains the seal). You should hear and feel significant pressure changes.

Fifth, check your progress. After 15-20 cycles, break the seal by twisting the plunger slightly or lifting it off. Look into the bowl. If water drains slowly or the bowl empties, the clog is loosening. Repeat the process 2-3 times if needed. If water still doesn't drain after multiple attempts, the blockage may require different tools or professional help.

The practical takeaway: Practice the plunging technique before you're in crisis mode. The key to success is creating a tight seal and using forceful, rapid motions. Many people fail because they use gentle, slow plunging motions that don't generate enough pressure to move the clog.

When to Try a Toilet Auger and How to Use One

When plunging doesn't work, a toilet auger becomes the next option to explore. Unlike a plunger that works through pressure, an auger physically breaks apart or removes the blockage. Understanding when to use an auger and how to operate it safely helps you progress toward solutions without unnecessary damage to your toilet.

Free Guide to Making Wax Melts at Home →

You should consider using an auger when: plunging hasn't worked after multiple attempts; standing water remains in the bowl 30 minutes after your last plunging attempt; you hear water draining very slowly or hear bubbling sounds (indicating a deeper blockage); or multiple drains in your home are slow (suggesting a main line clog, though an auger may not reach the problem area).

Before starting, understand how a toilet auger works. The tool consists of a long, flexible metal cable coiled in a housing, with a handle at one end and a tip at the other. When you turn the handle, the cable rotates. As the rotating cable extends into the drain, it can break apart soft blockages like paper and waste. If it encounters a solid object, the rotating motion may hook it so you can pull it back out.